S80 L6-3.2L VIN 98 B6324S (2007)
Impact Sensor: Service and Repair
Collision Sensor
Collision sensor
Operation number: 88454-2
Note! Some variation in the illustrations may occur, but the essential information is always correct.
Removal
Note! Removal steps in this procedure may contain installation details.
Disconnect the battery ground cable. See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting
Remove the headlamp. Refer to: Headlamps See: Lighting and Horns/Headlamp/Service and Repair/Headlamps.
Torque: Impact sensor to body, 6 Nm
Installation
To install, reverse the removal procedure.