S80 L6-3.2L VIN 98 B6324S (2007)
-
Remove the four plastic nuts at the lower edge.
-
Lift off the panel from the studs.
-
Remove the three clips.
-
Lift off the panel and remove the connectors for cargo compartment lighting and any 12 Volt socket.
-
On right-hand drive cars, both the side panels must be removed.
Applies to left-hand drive cars
-
Take the connector that was taped and connect it to the cable harness that was routed into the passenger compartment.
-
Install the pins for the cable ends into the connector as illustrated.
1. Blue (BL)
2. Green (GN)
3. Violet (VO)
4. Yellow (Y)
5. White (W)
6. Black (SB)
-
Slide the connector's catch back.
Applies to right-hand drive cars
-
Take the connector that was taped and connect it to the cable harness that was routed into the passenger compartment.