S80 L6-3.2L VIN 98 B6324S (2007)
Battery Cable: Service and Repair
Battery Cable To The Starter Motor Control Solenoid
Battery cable to the starter motor control solenoid.
Operation number: 37213-2
Removal
Note! Removal steps in this procedure may contain installation details.
Perform battery disconnecting and connecting. See: Service and Repair/Procedures/Battery, Disconnecting
Remove the following items:
-
air cleaner (ACL) housing Refer to: Air cleaner housing, B6324S See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance
Checks/Air Cleaner Housing/Service and Repair
-
the intake manifold Refer to: Induction pipe, B6324S See: Powertrain Management/Fuel Delivery and Air Induction/Intake Air Plenum/Service
and Repair
1. Torque: Battery lead to battery lead terminal, 14 Nm
2. Torque: Starter motor B+ terminal, 15 Nm
3. Torque: Generator B+ terminal, 15 Nm