S80 L6-3.2L VIN 98 B6324S (2007)
Disconnect the cable terminal that is to be replaced. See: Connector See: Auxiliary Power Outlet/Diagrams/Diagnostic Aids/Connector
Hint: If several cable terminals are to be replaced at the same time, spread out the splice points, as illustrated.
Cut the cable at a suitable point. Note the length of the new cable terminal cable.
Installation
Select a cable terminal with the same area as the old one.
Select a butt connector that corresponds to the cable area. The butt connector is the same color as the cable terminal cable.
Cut the new cable terminal cable to a suitable length.
Splice the cables. See: Joining cables See: Auxiliary Power Outlet/Diagrams/Diagnostic Aids/Joining Cables
Finishing work
Reinstall the cable harness. If necessary use a crimping sleeve and tie straps.
Install the battery negative lead. See