S80 L6-3.2L VIN 98 B6324S (2007)
Slacken off the inner nut on the lower control arm.
Use the eccentric screw to adjust toe angle to the correct value. See Wheel cambers See: Specifications.
Tighten the nuts slightly.
Check the thrust angle. It it does not comply with the specified value, undo the nuts and readjust the toe angle.
Tighten the nut. Tighten to 100 Nm.
Checking the front camber angle
Check the camber angle on both sides.
For the correct values, see: Wheel cambers See: Specifications.
Checking the front caster angle
Check the caster angle on both sides.
For the correct values, see: Wheel cambers See: Specifications.
Checking front toe angle
Check that the instruments are adjusted in relation to each other on the front and rear axles. This is extremely important so that the front wheel toe-in can