S80 L6-3.2L VIN 98 B6324S (2007)
Control Module: Service and Repair
Transmission Control Module (TCM)
Operation number: 43715-2
Removal
Note! Removal steps in this procedure may contain installation details.
Note! Make sure that the selector lever is in the neutral (N) position.
Perform battery disconnecting and connecting. See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting
Remove Accessory Drive Component Bracket. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Engine
Accessory Bracket/Service and Repair
Caution! Make sure that the terminals or pins/sockets of the transmission control module (TCM) and the TCM electrical connector are not
bent or damaged.
Torque: Gear selector mechanism (nut), 16 Nm
Installation