S80 L6-3.2L VIN 98 B6324S (2007)
Shift Cable: All Technical Service Bulletins
A/T - Key Stuck in Ignition Switch
NO: 43-52
DATE: 12-15-2006
MODEL: S80
MODEL YEAR: 2007
CHASSIS: < - 019600
SUBJECT: Key Can Not Be Removed From Ignition (SCU)
Description: A customer complaint of the key being stuck in the ignition on 2007 S80 cars up to chassis 019600 could be caused by a conflict between
the shift cable and shifter housing. "Shift to Park to Remove Key" may be displayed in the DIM (Driver Information Module). Note that the transmission
is in Park but the Park signal to the SCU (Start Control Unit) is missing due to the gear shift lever not being fully in position.
If the car is being driven in keyless mode, the customer complaint for this fault will be that they are unable to lock the car. "Shift to Park Position" may
be displayed in the DIM and the key chime may be active when the door is open. A description of the KVM (Keyless Vehicle Module) can be found in
VIDA Product Specification -> Design & Function -> Group 36.
