S80 AWD V8-4.4L VIN 85 B8444S (2008)
Hose/Line HVAC: Service and Repair
Condenser to Connector Block Line
Condenser To Connector Block Line
Operation number: 87465-2
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
Removal
NOTE: Removal steps in this procedure may contain installation details.
Drain the refrigerant from the air conditioning system.
Torque: M8, 24 Nm
Torque: M8, 24 Nm
Installation
Change and lubricate the O-rings with compressor oil.
To install, reverse the removal procedure Vacuum pump the air conditioning system.
Fill the air conditioning system with refrigerant.
Leak-trace the air conditioning system.
Carry out a performance test on the climate control system.
