S80 FWD L6-3.2L VIN 98 B6324S (2010)
2010 XC60 vehicles equipped with engine VIN code 98 & 99 S16 engines.
Volvo has identified that the cylinder head coolant bleeder hose 0-ring may start to leak due to incorrect material used in the 0-rings. If this condition
occurs the coolant level may drop and a Driver Information Module (DIM) message stating: LOW COOLANT LEVEL" may appear along with a red
warning triangle.
The corrective action is to replace the coolant bleeder hose on all eligible vehicles per the instructions in the attachment to this Retailer Technical
Journal.
PLEASE NOTE:
This Service Campaign will be in effect until November 30, 2012 regardless of mileage. Coverage is automatically transferred to subsequent owners.
PRODUCT MODIFICATION:
After the chassis range in the header the hoses have an improved 0-ring. In order to differentiate between the old hose and the new hose see the photos
shown in the attachment. The new hose has a black connector.
SERVICE:
Replace the bleeder hose PN 31319051 following the procedure in the attachment.
Attachment