S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Lift one corner of the outer module using a weatherstrip tool.
Pull off the module.
Installing the outer module
Clean the glass using a razor blade or similar.
Clean the glass using the cleaning cloth supplied with the outer module.
Cut out a template corner to corner with the inner module.
Position the template edge to edge with the inner module. Tape the template into place.
Note! The outer and inner modules must be positioned opposite each other.
To ensure optimal adhesion, carefully heat the glass. Use a hot-air gun or similar.
Remove the backing from the outer module.
Position the module in the correct place on the glass. Press the module into place. Press the module against the glass for 3-4 seconds.