S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Press in the active catches on both sides of the socket housing and slide out the receptacle housings.
Caution! Disconnect and work with only one cable at a time to minimize the risk of mixing them up.
Primary lock
Press in the locking tab on the cable terminal and carefully pull out the cable and the cable terminal. Use tool951 2812 Terminal removal tool See: Tools
and Equipment/951 2812 Terminal Removal Tool or tool951 2637 Terminal removal tool See: Tools and Equipment/951 2637 Terminal Removal Tool ,
as illustrated.
Connector, assembling
Primary locking
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.
Secondary locking
Press the secondary lock into place.
Example 1
Example 1
Socket type housings p/n 3523410-3, and equivalent pin housings
Replacement of cable terminals
Remove housing