S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Take the seat belts out of the guide (1) on the left-hand side bolster.
-
Put your hand into the side of the lower section of the left-hand side bolster. Release the catch and lift the bolster at the same time. Place the
bolster to one side.
-
Fold the backrest forward.
-
Lift out the cargo compartment carpet.
-
Press in the centre of the clips on the lower edge of the folding side panel on the left-hand side until a click is heard.
-
Remove the two clips.
-
Remove the plastic nut at the front/lower edge of the side panel.
-
Turn the knob (1) on the left-hand side through 90°.
-
Fold the side panel inwards and remove it.
-
Lift out the side panel and place it to one side. There is a new panel in the kit.