S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Panel, A-post, replacing
Panel, A-post, replacing
Detach the weatherstrip at the panel: Pull straight down.
Remove the 2 steel clips.
Pull the panel straight inwards into the car.
Lift upwards.
Install:
In reverse order.
Note! It is important that the clips are correctly positioned and that the panel is in position or the Inflatable Curtain (IC) may be negatively
affected.
Panel, B-Post, Replacing
Panel, B-post, replacing
Panel, B-post, replacing
Remove:
-
the front sill trim panel. See The front sill trim panel
-
the rear sill trim panel. See The rear sill trim panel
-
the end mounting from the front seat seat belt. See Seat belt buckle end mounting See: Restraint Systems/Seat Belt Systems/Seat Belt
Buckle/Service and Repair/Front Seat/Seat Belt Buckle End Mounting , (non-power seats only)
-
the end mounting on the front seat seat belt on power seats: Release the catches from underneath.
Move the seat as far forward as possible.
Detach the weatherstrip at the panel: Pull straight to the side.