S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Install:
-
the brake pipe in the ABS hydraulic modulator. Tighten to 17 Nm
-
the pipe in its holder. Open the holder
-
the ABS line in its clips on the brake pipe
-
the integrated relay / fusebox. See Hydraulic unit, replacing See: Hydraulic Control Assembly - Antilock Brakes/Service and Repair
-
the air cleaner (ACL) housing. See Brake pipe master cylinder / ABS unit, replacing See: Brake Pipe Master Cylinder / ABS Unit, Replacing.
Replacing the front right brake pipe
Clean around the brake pipe on the ABS hydraulic modulator. Remove the brake pipe from the ABS hydraulic modulator and holder