S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Install the lower screws to assemble the air conditioning aggregate. Tighten the screws. Tighten to 10 Nm.
Remove the tie straps.
Check that the air conditioning aggregate is against the rubber seal. Secure.
Tighten the air conditioning aggregate to the member. Tighten to 25 Nm.
Install the lower radiator hose.
Remove the lock grip pliers.
Install the screw for the mounting for the engine wiring cable duct at the front edge of the sub-frame.
Install the lower oil cooler hose on the air conditioning aggregate (automatic transmissions only).
Lower the car.
Installing the screws for the air conditioning aggregate
Install the upper screws to assemble the air conditioning aggregate. Tighten the screws. Tighten to 10 Nm.