S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Carefully press out the front and rear camshaft seals.
Remove the seals.
Remove
-
tools 999 5454 PRESS TOOL See: Tools and Equipment/999 5454 Press Tool
-
the camshaft cover
-
the camshafts.
Lift out the valve lifters. Use a suction cup.
Caution! Mark up and position the lifters so that their original position can be established.
Remove the screws holding the cylinder head on the cylinder block. Start at the sides and work alternately towards the center as illustrated.
Get help to lift off the cylinder head.
Note! Be very careful so that the contact faces are not damaged.
When replacing or working on the cylinder head
Remove
-
the intake manifold and gasket
-
the coolant outlet pipe.
Cleaning
Cleaning the gasket faces
