S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
![background image](/volvo/s80_t6/l6-2.9l_turbo_vin_91_b6294t/Page-2353137.png)
Disconnect the cable terminal that is to be replaced. See: Connectors, repair See: Diagrams/Diagnostic Aids/Connectors, Repair.
Hint: If several cable terminals are to be replaced at the same time, spread out the splice points, as illustrated.
Cut the cable at a suitable point. Note the length of the new cable terminal cable.
Installation
Select a cable terminal with the same area as the old one.
Select a butt connector that corresponds to the cable area. The butt connector is the same color as the cable terminal cable.
Cut the new cable terminal cable to a suitable length.
Splice the cables. See: Joining the cables See: Wiring/Joining the Cables.
Finishing work
Reinstall the cable harness. If necessary use a crimping sleeve and tie straps.
Connect the battery negative lead. See: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting