S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
-
Expose the integrated relay / fusebox. See Exposing the integrated relay/fusebox in the cargo compartment
-
Release the catch on the top as illustrated. Fold down the integrated relay / fusebox and lift up to release it.
Installing the integrated relay / fusebox in the cargo compartment
-
Install the integrated relay / fusebox. Ensure that the catches on the top engage correctly
-
Install the upholstery
-
Reinstall the floor hatch.
Rear electronic module (REM)
Preparations
Caution! New software can only be ordered when the control module is installed in the car. VIDA reads off the new control module identity
which is required to order the correct software.
Always check that the control module and control module box connectors do not have bent or damaged terminals or socket / sleeves. This may have been
the cause of the fault.
Removing the control module