S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Choose a terminal removal tool with the correct diameter
There are two cavity opening sizes.
See illustration.
Choose a terminal removal tool which matches the cavity opening.
-
The smaller end is for diameter 2.1
-
The larger end is for diameter 3.5
Press the cable terminal in the cavity forwards as far as it will go to free the locking tab from the cavity catch.
Insert the terminal removal tool in the groove as illustrated.
Always follow the instructions in Using terminal removal tools See: Diagrams/Diagnostic Aids/Using Terminal Removal Tools which give the correct
working procedure.
-
Proceed to chapter New cable terminal See: Diagrams/Diagnostic Aids/New Cable Terminal Seal sws and plug . Replacing a cable terminal in
order to crimp a new cable terminal.
Housings With Square Cavity Openings
Housings with square cavity openings
Terminal removal tool