S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Additional information:
-
To replace indicator switch see Turn signal switch, replacing See: Lighting and Horns/Sensors and Switches - Lighting and Horns/Turn Signal
Switch/Service and Repair.
Press Continue when fault has been repaired.
Continue - Checking the components
-------------------------------------------------
Checking the components
Activate reset button on indicator switch and read status.
Hint: If read-out of status on read and reset button gave a correct result the fault is not in the indicator switch.
Did read-out of status on read and reset button give a correct result?
Yes - FAULT FOUND
no - Replacing the component
-------------------------------------------------
Replacing the component
Test by replacing the control unit.
Caution! A new control unit is supplied without software. The new control unit must be programmed before it will work.
Additional information:
-
To replace and program the control unit, see Steering wheel module (SWM), replacing See: Steering Column Control Module/Service and Repair.