S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Install:
-
the seat belt (inertia) reel with the seat belt tensioner by pushing it down through the clip into the fixture
-
screws (x 2). Tighten to 48 Nm
-
the connector. See Igniter wire connector See: Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Igniter Wire Connector
-
seat belt buckle end mounting.
-
the B-post panel according to Panel, B-post, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Panel,
B-Post, Replacing
-
Check the seat belt function.
Removing the rear seat belt (inertia) reel
