S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Install:
-
the heated oxygen sensors (HO2S). Lubricate the studs using paste 116 1408. Tighten to 45 Nm
-
the connectors
-
the lower engine cover.
Finishing
Install:
-
the wiring for the heated oxygen sensors (HO2S) using the clip and the clamps
-
the engine stabilizer brace.
Clamp the servo hose to the torque rod using a tie strap.
Test drive the engine.
Check for leakage.
Replacing rear heated oxygen sensors (HO2S)
Removing rear heated oxygen sensors (HO2S)