S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
illustrated.
At the same time pull the cable carefully backwards.
Connector, assembling
Primary lock
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the seal is correctly positioned and that the cable terminal is properly locked by pulling carefully on the cable.
Secondary lock
Press the secondary lock into place.
Splicing the Cables
Splicing the cables
Strip the wire
Peel 5.0mm / 0.2 in of the insulation off the 4 cable ends (13/64 inches) using pliers951 2620 Stripping tool See: Tools and Equipment/951 2620
Stripping Tool.