S80 T6 L6-2.9L Turbo VIN 91 B6294T (2002)
Use a feeler gauge approx. 0.15 mm.
Press in locking catch and extract the cable terminal.
-
Proceed to chapter New cable terminal See: Diagrams/Diagnostic Aids/New Cable Terminal Seal sws and plug . Replacing a cable terminal in
order to crimp a new cable terminal.
Connector
Connectors, repair
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Connector
The commonest types of connector and central electrical unit in the vehicle are listed here.
For more information about secondary locking, primary locking, terminal removal tools, etc., see the link by each type of connector.
Note! Before working in the connector, disconnect the battery negative terminal, Battery, disconnecting See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.