volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Technical Service Bulletins|Service and Repair|Page 17538 > < Technical Service Bulletins|Service and Repair|Page 17536
Page 6
background image

-

Remove the side panel on both sides (1) of the tunnel console. First twist the clip at the rear edge of the panel a 1/4 turn. Pull the rear edge of the
panel outwards and rearwards.

-

Only for cars without pre-routed Melbus cable: Remove the sill trim panel (2).

-

Open the ashtray completely and remove it.

-

Remove the ashtray holder by pressing in the catches and pulling it out.

Technical Service Bulletins|Service and Repair|Page 17538 > < Technical Service Bulletins|Service and Repair|Page 17536