S80 T6 Executive L6-2.8L Turbo VIN 90 B6284T (2001)
Inspect and clean all parts.
Blow out aluminum housing.
Oil parts with engine oil.
Reassemble solenoid.
Check operation as described in operations 1 and 2.
Reinstall solenoid in car using new seal.
Testing
5
Erase diagnostic trouble codes.
Test-drive car.
Check that no new diagnostic trouble codes are displayed.
If new codes are displayed, continue troubleshooting as per VADIS.
WARRANTY STATEMENT:
Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type 01.