S90 L6-2.9L VIN 96 B6304S (1998)
Install:
-
the bag module on the seat back frame.
2 Torx 25 screws.
NOTE: If SIPS bag was activated the attachment screws for the bag module should be replaced with new ones. Use the same type and quality of
screws as the ones replaced.
Tightening torque for bag module: 6.0 Nm (4.5 ft.lbs)
Sensor
Insert sensor between the seat back and the seat frame.
Install cable ties (2) as shown in the image.
Sensor Module
