S90 L6-2.9L VIN 96 B6304S (1998)
Torque: 50 Nm (37 ft.lbs)
Move the seat to furthest forward position.
Screw the seat adjustment rails in place at the rear edge:
Torque: 50 Nm (37 ft.lbs)
Install protective covers on the seat adjustment rails.
Install seat belt in the seat frame.
Torque: 30 Nm (22 ft.lbs)
When Front Seat Is In Place
Install seat panel clips.
Do not forget to arm the SIPS bag:
Install transport safety device on inside of cover panel.
Install cover panel.
WARNING: On mechanical seat the cotter pin that prevents the seat moving past the rearmost position must not be removed. Removing the
pin will impair the SIPS bag function.
