V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Use sand filler (2 comp) if possible. Alternatively an etching base filler can be used.
Note! Etching base filler should only be applied to clean panel surfaces and the paint should be sprayed in a thin coat next to the panel surface.
This coat is over-sprayed thereafter with a sand filler in accordance with the above.
The total primer coat thickness should be 35 microm on all surfaces (2-3 spray strokes).
Apply stone chip protection
Use sprayable stone chip protection.
Spray in one thick even layer.
Can be over-sprayed in the vehicle's color.
Primer
Primer
Applying primer to untreated panel surfaces
