V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Press the piston in carefully.
Ensure that the dirt guard is correctly positioned.
Install the bleed nipple and tighten to 5 Nm.
Finishing
Inspect
-
the brake disc.
-
the brake caliper guide.
Install the brake pads, paying attention to the wear-indicator.
Install the brake caliper to the guide pins.
Tighten to 35 Nm.
Install the brake hose. Use new sealings.
Tightening torque 15 Nm.
Make sure that the brake hose is not twisted.
Bleed the brake system.
Install the wheel.
Rear Brake Calipers
Reconditioning Rear Brake Calipers
Special tools:
981 4071
999 5634
Preparations
Set the parking brake mechanism using the central adjuster nut in the parking brake handle.
Remove the wheel.
Clean the brake caliper thoroughly.
Draining the brake fluid
Remove the protective cap from the bleed nipple.
Connect a hose. Unscrew the nipple.
Lock the pedal in its depressed position using a pedal jack.
Use a container to collect the brake fluid.
Removing the entire rear brake caliper
