V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Carefully press in tool 999 5651 between the sealing ring and the camshaft.
Carefully pry out the seal.
Oil the new seal.
Install the new seal for the camshaft with variable valve timing. Use drift 999 S718.
Install the new seal for the camshaft without variable valve timing. Use drift 999 S719.
Install the screw holding the inner timing cover to the cylinder head
Secure the crankshaft position
Install the adjustment tool.
Remove:
-
the front air baffle
-
the support between the cylinder block and the intake manifold
-
the mounting screws for the starter motor
-
the lower timing cover.
Place the starter motor to one side.
Remove the blind cover plug and the blind cover washer
Turn the crankshaft clockwise slightly to avoid the adjustment tool being in the wrong position.
Install adjustment tool 999 5451. Ensure that the adjustment tool bottoms out against the cylinder block.
Turn the crankshaft back counter-clockwise until it stops against the drift.