V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Water Pump: Procedures
Draining coolant
See Replacing coolant, refer to Coolant, Service and Repair.
Remove:
-
The engine cover
-
The upper and lower timing covers
-
The idler pulley
-
The right front wheel.
Slacken off the fender liner slightly.
Remove the protective panel from the front-rear member.
Turn the crankshaft until all the markings correspond.
Remove:
-
The upper timing cover.
Remove the timing belt. Move the timing belt to one side, see Replacing toothed (timing) belt, refer to Engine Timing Components.
Compress the tensioner damping unit with compression tool.
Remove the tension pulley.
Removing the coolant pump
Cleaning the gasket and mating surfaces
Clean the cylinder block thoroughly. Remove any gasket residue.
Installing the coolant pump