V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Remove the pipe clamp (A).
Remove the pipe clamp (B) on the distributor side.
Remove the pipe clamp (C) at the generator bracket.
Install 115 8957 HOSE PLIERS See: Tools and Equipment/115 8957 Hose Pliers on the inlet hose. Clamp the hose.
Collect the oil in a container.
Remove the pipe screw (D). Remove the pipe.
Plug the holes to prevent oil running out.
Move the pipe to one side and allow as much oil as possible to drain out.
Removing the support bracket from the cross member
