V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
If any of the part numbers shown are visible, the ECM already has the most recent software and does not require an upgrade:
NOTE:
BATTERY CHARGER MUST BE CONNECTED; VOLTAGE SHOULD BE MONITORED, AND SHOULD NOT EXCEED 14 VOLTS
DURING THE DOWNLOAD. CHARGER SHOULD NEVER BE SET TO HIGH DURING A DOWNLOAD TO ANY VEHICLE.
After the ECM number is recorded, proceed with the ECM Reprogrammer download as usual. Please note that it is possible that the status bar may not
fill in as the download progresses, instead only an hour glass will appear. This is normal do not exit from the download until the status bar does fill in
and FINISHED appears in the dialog box. It may take several minutes for the ECM Reprogrammer download to finish.
If during the download, the process stops and/or you receive an "UNHANDLED EXCEPTION" error close all open windows until you are back at the
desktop. Remove the key and disconnect the car from PC. Reconnect the car to the PC, turn the key on, restart the VIDA application then restart the
ECM Reprogrammer process. When you are asked if the ECM part number is corrupt, say YES. Profile the car as usual then add the 13 digit ECM part
number that was recorded in the beginning paragraph into the ECM part number box.
Continue with the ECM Reprogrammer download as usual, and please note that the status bar may not fill in as the download progresses, only an hour
glass may appear. This is normal, do not exit from the download until the status bar fills in and FINISHED appears in the dialog box. This may take
several minutes.
If you did not record the ECM part number as requested in the first paragraph, and you have received the message that the ECM part number is corrupt,
access the ECM and record the part number from the label on it. Use the chart to find the correct part number to enter in the ECM part number box in
VIDA shown.
