V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Remove:
-
Remove sensor from roof liner (taped on roof liner).
-
Remove connector from the sensor and take the cover away.
Install:
-
Position sensor in the cover and mount the connector.
-
Install the sensor in the roof liner.
-
Check the fitting.
Removing/installing ultrasonic cable harness
Remove:
-
Remove the panel under the dashboard on passenger side.
-
Remove interior lightning completely.
-
Undo sensor connector from ultrasonic module.
-
Remove sensor cable from A post and take it out.
Install:
-
Position sensor cable and install connector in the ultrasonic module.
-
Install interior lightning.
-
Install panel under the dashboard.
Installing A post panel
-
Install A post panel.
-
Turn ignition key to position II and mount the battery ground lead.
-
Always read the diagnostic trouble codes in the VGLA alarm system.