V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Trunk / Liftgate Switch: Service and Repair
Trunk/Tailgate Switch
Removing trunk/tailgate switch
-
Remove boot lid cover (S 40).
-
Remove tailgate cover (V40).
-
Remove the connecting rod from the lock (push locating pin in and separate parts from one another).
-
Undo the (3x) lock mounting bolts (A) and remove the lock.
-
Remove connectors.
-
Replace complete lock, transfer connecting rod.
Installing trunk/tailgate switch
-
Install connectors.
-
Position lock.
-
Install the (3x) bolts (A), tighten to 10 Nm.
-
Install the connecting rod in the lock (push locating pin in position).
NOTE: Adjust rod if necessary and check the trunk/tailgate switch.
-
Install boot lid cover (S 40).
-
Install tailgate cover (V 40).