V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Connect the gear-shift position sensor connector. Install the connector on the bracket.
Clamp the cable harness for the sensor to the cable harnesses for the solenoids and oil temperature sensor.
Clamp the cable harnesses under the transmission cable harness and the gear-shift position sensor.
Installing engine compartment components
Install:
-
The battery shelf
-
The air cleaner (ACL) housing assembly, see Replacing the air cleaner (ACL).
-
The battery
Checking diagnostic trouble codes (DTCs)
Check and erase any diagnostic trouble codes (DTCs). Check the positions of the gear-shift position sensor. If it is not possible to use VCT 2000 as a
handheld test tool, use the Volvo Scan Tool (ST) as the test instrument instead. To connect the Volvo Scan Tool (ST), see Connecting the Volvo Scan
Tool (ST).
