V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
CAUTION: Ensure that no grease gets onto the mating surfaces between the boot and constant velocity joint. Ensure that the boots do not crease
when the clamps are tightened.
Clean off excess grease with denatured alcohol.
Slide the boot onto the constant velocity joint. Ensure that it is positioned correctly on the constant velocity joint.
Install the outer clamp. Use pliers 951 2619.
Vent the boot
See (Z16).
Install the inner clamp. Use pliers 951 2619.