V40 L4-1.9L Turbo VIN 27 B4204T4 (2003)
Shift Interlock Solenoid: Procedures
Replacing the shift lock solenoid and micro-switch
Removal
Conditions
-
Remove the center console.
Removing the shift lock solenoid with micro switch
Caution: Move the gear selector to position L to prevent damage when removing/installing the micro-switch.
If the shift lock solenoid does not operate:
Turn the ignition key to position I. Depress the SHIFTLOCK OVERRIDE button to move the gear selector lever.
-
Remove the connector from the gear shift.
Disconnect the connector (A)
-
Remove the clamp (B). Remove the solenoid.
Caution: Undo the clamp (B) on the reverse of the bracket to prevent damage to the clamp.
-
Remove the micro-switch: Press the lugs together.
Installation
Installing the shift lock solenoid with micro switch
Caution: Move the gear selector to position L to prevent damage when removing /installing the micro-switch.
Turn the ignition key to position 1. Depress the SHIFTLOCK OVERRIDE button to move the gear selector lever.
-
Press the micro-switch into place on the gear selector
-
Install the micro-switch. Secure the micro switch using the clamp
-
Connect the connector. Secure the connector on the gear selector
-
Install the center console according to Rear center console.
Checking the shift lock function
See Shift lock and ignition switch interlock
Checking diagnostic trouble codes (DTCs)