V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Install:
-
the gray connector (GR)
-
the siren in position (B) with the rubber plug
-
the new screw (A). Tighten to 10 Nm.
Note! Use lubricating grease (P/N 1161427) in the connector.
Installing the fender liner
Install the fender liner. See Plastic fender liner See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair.
Finishing work
Turn the ignition to position II.
Reconnect the battery negative lead.
Enter the anti-theft radio code.
Check its function.
Read off any diagnostic trouble codes (DTCs).