volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 10181 > < Initial Inspection and Diagnostic Overview|Page 10179
Page 73
background image

Note! Do not fill the protective cover with grease.

-

Press grease, P/N 1161417-9, into the terminals directly from the tube

-

Check that all the cavities in the connectors are filled

-

Use a loose male pin to ensure that contact in sockets is good. The pin should remain in position when pulled gently.

Fault-Tracing Information

Fault-tracing information

Initial Inspection and Diagnostic Overview|Page 10181 > < Initial Inspection and Diagnostic Overview|Page 10179