V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
A, B and C.
Install:
-
the guide in the door
-
two clips.
Press the two rods into the guide.
D.
Press the locking rod into the lug.
Install the two screws in the handle.
Check its function.
Note! If necessary, adjust the length of the connecting rod using the adjusting block on the rod.
Installing the door insulation
Install:
-
the run-off profile. See Run-off profile See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Replacement/Side Door With Controls
-
the upper tie strap in the door panel
-
the door panel. See The panel for the rear side door See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Removal
and Replacement.