V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Lift the seat out of the vehicle.
NOTE: Place the seat on a workbench. Use a piece of cloth to protect the side of the seat from damage.
Remove:
-
the knob to the side (1). Turn the knob counter
-
clockwise as far as possible. Use force and turn the knob further counterclockwise at the same time as pulling the knob out
-
the ring
-
the armrest (if applicable). Pull the snap ring out.
Fold the backrest forward. Open the upholstery zip fastener (2) from the lower side.
Unhook the upholstery from the lower side of the plastic panel.
Pull the upholstery halfway up the backrest. Remove the 2 springs (3) in the middle.
Lift the plastic frame (4) from the backrest. Allow the plastic frame to lie on the backrest.
Turn the seat on its side.
NOTE: Note the routing of the cable harness.
Disconnect the connector.