V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
Pull the bracket apart.
-
Install the 4 washers with the segment in the correct position (with the ribbed side towards the bracket).
-
Assemble the bracket and align the screw with the nut. Tighten the nut by hand.
-
Tighten the nut. Tighten to 17 Nm.
-
Install a new indicator pin in the bracket (only applies to cars up to chassis number- 642122).
-
Hook the spring into place.
-
Secure the SRS ignition cable.
