V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Remove the protective cap from the bleed nipple and connect the transparent hose to the collecting bottle. Open nipple about one turn.
Pressurize braking system with bleed unit.
Drain off 0.2-0.3 liters of brake fluid.
Close bleed nipple and remove hose.
Tightening torque: 5 Nm.
Install protective cap.
Fill the brake fluid reservoir slowly.
Slowly depress the brake pedal several times.
Changing order
Bleed/change in the following order:
-
Rear right
-
Rear left
-
Front right
-
Front left
Inspecting brake system after changing
Remove the bleed system.
