V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Install in the passenger compartment:
-
The four nuts for the power brake booster.
Tighten to 23 Nm
-
the bolt, washer and spring for the support rod
-
the soundproofing panel. Note the wiring for the courtesy lighting
-
the screws for the soundproofing panel.
Installing master cylinder
Install the master cylinder.
Final check
-
Read off and erase any diagnostic trouble codes (DTCs)
-
Test drive the car
-
Check whether any diagnostic trouble codes (DTCs) have been stored. Read off any stored DTCs.
With Manual Transmission
Replacing The Power Brake Booster With Manual Transmissions
Removal
Removing the master cylinder
Remove the master cylinder.
Removing the power brake booster
Remove from the passenger compartment: