V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Clean the power brake booster and the cowl panel.
Install in the engine compartment:
-
A new gasket on the power brake booster
-
The power brake booster. Ensure that the support rod is correctly positioned on the brake pedal
-
the vacuum hose.
Install in the passenger compartment:
-
The 4 nuts for the power brake booster
-
tighten to 23 Nm
-
the bolt, washer and spring for the support rod
-
The soundproofing panel.
Note! The wiring for the courtesy lighting.
-
The screws for the soundproofing panel.
Installing master cylinder
Install the master cylinder according to Replacing the master cylinder on right-hand drive cars with manual transmissions See: Hydraulic System/Brake
Master Cylinder/Service and Repair/Removal and Replacement/Replacing The Master Cylinder On Right-Hand Drive Cars With Manual Transmissions.
Final check
Read off and erase any diagnostic trouble codes (DTCs).
Test drive the car according to Test driving See: Testing and Inspection/Initial Inspection and Diagnostic Overview.
Check whether any diagnostic trouble codes (DTCs) have been stored. Read off any stored DTCs.