V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Install:
-
the valve and wiring.
Note! Ensure that the wiring does not catch or rub.
-
the cable in the intake manifold
-
the clamp on the cable. Tighten to 6 Nm
-
the quick-release connector on the vacuum pump
-
the valve in the power brake booster
-
the relay terminal.
Finishing
Ignition on (position II). Connect the negative battery lead according to Note when disconnecting and connecting the battery lead See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Caution! Always connect the battery lead according to Note when disconnecting and connecting the battery lead See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Activate the anti-theft radio code.
Check
Check the function of the vacuum system.
Check and erase any diagnostic trouble codes (DTCs).
Replacing The Vacuum Pump
Replacing the vacuum pump
Removal
Preparations