V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
-
the screw and nut. Tighten by hand.
-
Remove the lifting beam and lifting hook.
-
Tighten to 98 Nm.
-
Install the air cleaner.
Replacing the front engine mounting
Removing the front engine mounting
Remove:
-
the screw and nut (B) from the engine mounting
-
the screws (A)
-
the engine mounting.
Installing the front engine mounting
Install:
-
the engine mounting. Position the hole against the front of the car
-
the screws in the front-rear strut. Tighten to 35 Nm
-
the screw and the nut in the engine mounting. Tighten to 55 Nm.
Replacing the rear engine mounting
Removing the rear engine mounting
Remove:
