V40 L4-1.9L Turbo VIN 29 B4204T3 (2002)
Valve Clearance: Adjustments
Valve Clearance, Setting/Adjusting
Valve clearance, setting / adjusting
Special tools:
999 5006 LIFTING BAR See: Tools and Equipment/999 5006 Lifting Bar
999 5383 LIFT ARM See: Tools and Equipment/999 5383 Lift Arm
999 5460 Lifting hook See: Tools and Equipment/999 5460 Lifting Hook
999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool
999 5199 COUNTERHOLD See: Tools and Equipment/999 5199 Counterhold
999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool
999 5454 PRESS TOOL See: Tools and Equipment/999 5454 Press Tool
999 5670 Pliers See: Tools and Equipment/999 5670 Pliers
999 5765 Holder camshaft See: Tools and Equipment/999 5765 Holder Camshaft
999 5752 Feeler gauge See: Tools and Equipment/999 5752 Feeler Gauge
999 5451 ADJUSTMENT TOOL See: Tools and Equipment/999 5451 Adjustment Tool
951 2767 Roller See: Tools and Equipment/951 2767 Roller
999 5454 PRESS TOOL See: Tools and Equipment/999 5454 Press Tool
999 5719 Drift See: Tools and Equipment/999 5719 Drift
999 5718 Drift See: Tools and Equipment/999 5718 Drift
999 5450 PUNCH See: Tools and Equipment/999 5450 Punch
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparation
Remove:
-
the cable from the battery negative terminal. First read Note when disconnecting and connecting the battery lead See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Removing the starter motor
Remove:
-
the screws for the starter motor
-
the support bracket for the intake manifold
-
the connector for the oil pressure switch
-
unhook the starter motor and allow it to hang.
Removing components
